The new electromechanic swing gate operator SWING X "The Big One" is now available for gate wings up to 3000mm length and 500 Kg weight. Massive mechanical limit stops which can be adjusted for OPEN and CLOSE direction are integrated and make inconvenient floor limit stops dispensable! Together with the ST60 control unit a safe obstacle detection system is enabled. The Big One does not only shine from the outside also the inner parts will convince you! (CS) » more

From now on all 230V sliding gate operators are equipped with the unique control unit including a display. With the plaintext-menu displayed in English the startup is much faster and easier to handle. Also the direct connection of a 8,2kOhm security contact barrier (2 channels) adds to the outstanding character. You will spare time time needed for wiring works as well as the additionaly needed resistance evaluation device. With this you have the cost advantage on your side. (FIS) » more

The popular PASS 830 family continues to grow! On top stands the PASS 830L6 with 6m closing width and a round aluminium barrier. At the bottom you will encounter the 830L3 with 3m closing width and rectangular barrier to complete the PASS family. The new 830 barrier operators have an extremely robust/strong motor and drive combination with 100% operating factor and 6 sec. opening time. With the unique tousek housing design KONVEXA you will have a high brand recognition with your future customers and on top of that a very competitive price. (CS) » more

After the very successful control units for the sliding gate operator PULL CR24 and the ST12/4 for the swing gate operator series SLIM, we have the pleasure to present the new control unit with display. It serves for nearly all swing gate operators with 230V alternative current motors. A plaintext menu in the English language, a programmable soft stop and a direct connection possibility for 8,2k sensing edges (2 channel) are the most important characteristics.(FIS)

The SLIM can already be ordered with limit switches. These limit switches are proximity reed contacts and very reliable and maintenance free. Placed on the under-side of the operator they can easily be programmed without tools. With the use of limit switches no mechanical floor steps are required in the open position, which facilitates the automation and avoids disturbances of stumbling.(FIS)

On request we have complemented our cantilever system program for sliding gate operators. The LWS100 is smaller and should be considered as price alternative. The profile size is 69/75/3mm. It can be used for a maximum load of 20kg per meter and a passage width of a maximum of 4m. Of course we deliver this new cantilever system with the same high quality as the two bigger ones: LWS110/1 and LWS120/1. It consists, beside the extremely solid rolling gears, of a profile made of galvanized strip steel, which points out due to its high measuring accuracy, important for a silent gate operation.(FIS)

With its modular system M3000 or M5000 an access control from the smallest installation with two readers up to a big installation with 32 centrals can be realized, which functions offline as well as online. The connection of a computer with the central is effected through a converter INT 485C. It works with proximity readers. Card readers are available as alternative. Even the tousek Wiegand radio can be connected with the series M.(FIS)