Emergency release
The operator Turn 310UF locks the gate reliably. The locking can be released easily and enables the manual opening and closing of the gate in case of power failure.

Integrated limit stop
In order to avoid a limit stop on the floor - which can be dange­rous and annoying - the operator has built-in adjustable mechanical limit stops for open and closed position of the gate.

Soft stop
In combination with the control unit ST50 the gate stops in both directions with reduced speed. The harmonic gate movement ensures that the mechanical parts of the gate and operator have an increased life expectancy.

The operator unit
all components are made of metal and the axles are carried on ball bearings.

Marine quality
One of the few visible parts is the motor/gearbox couer. This is made from stainless steel to be maintenace free. Optionally the whole casement is available in stainless stell.

The operator 310UF
is used when the design of the gate should be preserved. Gates with leaves up to 3m width and 400kg weight are moved by this operator in an invisible way.The strong 230V motor ensures a smooth and powerful motion.

The massive gearing and motor unit in metal are inside an aluminium die cast housing. This is important for a long working life and trouble-free operation.

The self-locking gearing ensures the gate is locked in every position and therefore an additional locking device is not necessary.*)

The Turn 310UF can be released in the event of a power failure with the key provided.

*) depending on the installation it may be necessary to install an electric lock to obtain a fixed latching.