Operator spindle
an extremely massive spindle together with a spindle socket made of brass ensures a long lasting and reliable operation.
Of course the spindle is supported on both sides. This prevents unwanted vibrations.

Integrated limit stop
in order to avoid a limit stop on the floor - which can be dangerous and annoying - the operator has a built-in mechanical limit stop.

Lockable emergency release
the operator closes the gate reliably. The emergency release which is important in case of power failure is lockable with a standard profile half cylinder. It can therefore be replaced and integrated into an already existing house key system. The cylinder and 3 keys are included as standard equipment.

Soft stop
in combination with the control unit ST60 the operator stops in both directions with reduced speed. This enables a harmonic gate movement and prevents damage on the operator mechanical parts and gate.

Secure with ARS sytem
a torque sensor enables the use of the automatic reverse system (ARS). When touching an obstacle the operator stops and reverses automatically. This guarantees a high degree of safety.

by the use of high-quality components the massive motor/drive unit ensures safe power transmission and long lasting operation

For the development of the SWING X
electromechanic operator the main objective was set upon reliability and long durability. For this reason all parts are made of premium materials such as aluminium, nirosta or galvanised steel.
Also the whole gearing which is placed in a diecast aluminium housing as well as the drive unit are entirely made of metal. This ensures long lasting trouble-free operation.
The drive/operator is gimbal-mounted on both gate and column side. This enables an absolutely free of play installation of the operator as well as smooth and even movement of the gate.