The radio transmitters RS 433
as well as RS 868 are equipped with the extremely
safe rolling code system. Rolling code means that
by each activation of the radio transmitter a new
radio code is emitted. All previous codes are invalid
and will not be accepted anymore, this avoids a reading
of the radio signal. Each transmitter is an individual
item. In combination with an frequency-adjusted antenna
with a range of up to 200m.
Beside the standard radio transmitter a mini transmitter
as well as wall transmitters and a radio code lock
are available.
The new radio code lock is designed like a four-channel
radio transmitter. A code can be entered on three
channels. At all times you can transmit on one channel.
The code to be entered consists of an eligible
5 digit button combination.
BT40
•
Frequence 40 MHz
•
selflearning technology, i.e. the codification of the
transmitter is memorized in the receiver.
•
up to 64 different channels can be memorized
•
in combination with rod antenna FK 4 increased range
up to apr. 100m
•
individual memorized codifications or total receiver
memory can be deleted
• Pitching antenna
(1,8m length) enclosed
RS433
•
Frequence 433 MHz
•
for given orders / received orders for gate installations
•
for the operation of roller shutters (sun protection
system)
•
for the operation of light switches
•
access control
•
selflearning technology, i.e. the codification of the
transmitter is memorized by the receiver
•
up to 84 different channels can be memorized,optionally
up to 341.
•
Deletion of the complete receiver memory or individual
transmitter codes
•
in combination with rod antenna FK 433 up to a 200m
range
•
10 different radio transmitters (1–12 channels,
mini transmitters, wall transmitters, radio code lock,
etc.)
• 12 different
radio receivers (1-, 2- or 4-channels, with or without
casing, 24V or 230V etc.)
RS868-Rolling
Code
All
functions correspond to the RS433. Instead of 433
MHz the 868 MHz is used as a carrier frequency.
