is the
result of a brand-new concept. The high-quality aluminium
rail guarantees absolute corrosion resistance and is about
2/3 lighter than usual steel rails.
The
solid roller unit, with
its large polyamide rollers (ballbearing-cushioned) guarantees
maximum quiet while running, even at highest load, as
well as reliability for many, many years.
Light
and stable Hollow-chamber construction makes
the LWA 115 cantilever system for sliding
gates extremely light. Despite sparing use of materials,
flexural strength and carrying power were increased
over usual steel rails.
Flexible The roller units, adjustable in height
and angle, completely eliminate load alternation reactions.
Rational The technically innovative cantilever
systems profile makes installing the gear rack and limit
switch time-saving and rational.
Enduring Using aluminium and stainless steel
guarantees absolute corrosion resistance.
Quiet The aluminium rail, combined with
the solid roller unit and the large polyamide rollers
(ballbearing-cushioned) guarantees the greatest quiet
while running.
Compatible The LWA 115 has
been designed to be optimally compatible with the tousek
Pull sliding gate series; of course, it can also be
operated manually.
The
unique rail allows the gear rack and gate set-up to
be mounted rationally on the aluminium rail without
drilling, which saves much time.
The proximity
limit switch from the tousek Pull R operator series
can be easily inserted into the frame and stopped at
any point desired.
The
tousek Rollco® LWA 115
system is available in two bearing lengths and for a passage
width of up to 5.8 metres. The aluminium rail can be ready-made
if desired.
A
plastic gear rack, which can be inserted in the frame,
is responsible for the height-specific compatibility
of the LWA 115 with the tousek Pull
Series operators.
