English

tousek PULL T

gives a dynamic impetus to your gate

The advantages at a glance:

  • Gearing made of tempered steel for maximum reliability
  • One-piece cast aluminum housing for more solidity
  • Comfortable emergency release in case of power failure
  • Plug-and-play control system integrated in a housing for maximum ease of use
  • Intelligent sensor for more safety and comfort
  • Passive main closing edge for greater cost efficiency
  • Self-learning end positions without limist for easier commissioning
  • Automatic Reversal system ARS for maximum security
  • Standard soft stop for smooth gate movement
  • Permanent active force control for worry-free operation
  • Battery can be directly integrated for easier operation in emergency mode
  • Power saving mode for increased energy efficiency

pull t kl 04

Gearing made of tempered steel for maximum reliability

All Pull T models are serially equipped with a massive metal gearing. Only high quality branded oil is used, in order to ensure an optimal lubrication, even in low temperatures.The result: enhanced reliability and an evenlonger durability.


pull t kl 03

One-piece cast aluminum housing for more solidity

Inside the PULL T there is a one-piece die cast housing made of highly-strength corrosion-resistant aluminium. Compared to other drives the torsional and bending strength is increased and the service life is maximized


pull t kl 05

Comfortable emergency release in case of power failure

 In case of power failure the emergency release is locked with a standard euro cylinder. It can be exchanged and integrated into an already existing key system. The scope of delivery includes a cylinder and three keys.


steuerung de kl

Plug-and-play control system integrated in a housing for maximum ease of use

Under the cover of the PULL T there is the latest generation of control systems. Terminals, fuses and programming buttons are accessible without opening the control box and protected from rain and from mechanical influences. The main focus of all our controllers is the easy setting of all functional processes. All parameters as impulse /automatic mode, partial opening, soft stop and much more can be programmed in a very user friendly and time saving way by means of four buttons, a large backlit two-line LCD display and a plain text menu guidance.

You want more information about our controls? Please click here!


pull t kl 02

Intelligent sensor for more safety and comfort

Another feature of the PULL T series is the highly sensitive and patented sensor for speed measurement. It is able to process  6,200signals/second! For practical purposes, this results in numerous advantages. Thus, the PULL T controls actively and permanently regulate the required force in each case. The force remains "full" at any speed, so that later adjustments are not necessary. In addition, our well- known high safety standards have been improved for these automation series. It goes without saying that the PULL T meets the standard according to EN 13241-1.


pull t kl 10

Passive main closing edge for greater cost efficiency

The PULL T automation series are not only safe, but also groundbreaking efficient. With gates with up to 800kg weight, the active contact strip can be omitted at the main front edge, without compromising safety in any way. An expensive power supply system including time-consuming assembly work can be omitted. Thus, it doesn not only save precious time but also money. A fact that has been extensively tested and confirmed by TÜV Süd.


pull t kl 07

Self-learning end positions without limist for easier commissioning

During the installation all PULL T models learn automatically the end positions. In a second phase you can finely adjust the set positions or adapt them to your needs. Mechanical limits, that may be defective or freeze in winter, are completely eliminated.


pull t kl 11

Automatic Reversal System ARS for maximum security

Thanks to the integrated speed sensor the actuator is provided with an automatic reversing system - called ARS. If the gate meets an obstacle, the PULL T stops immediately and reverses automatically. The highest level of security.


Feder

Standard soft stop for smooth gate movement

The PULL T operator stops at reduced speed in both directions. Besides the harmonious movement of the gate also the entire mechanism of the gate and the drive is protected.


pull t kl 08

Permanent active force control for worry-free operation

The PULL T actively regulates the force required for the gate movement. Thus, whether summer or winter, a smooth operation is ensured. In addition, the adaptive power regulation protects the drive system, since only the actual necessary force is used.


pull t kl 01

Battery can be directly integrated for easier operation in emergency mode

On request, a battery can be inserted directly and without additional casing or charging electronics into the PULL T24 or T24speed for emergency operation. Thus, all drives are also suitablefor a subsequent upgrade


pull t kl 09

Tested by TÜV Süd according to EN 13241-1

High-resolution speed sensor, so precise as never before: 6,200 (!!) signals/second. In combination with the ingenious software the Pull T meets the highes safety standards of tousek.


pull t kl 06

Power-saving mode for increased energy efficiency

The PULL T helps to save precious energy and time. The intelligent control switches idle unnecessary power consumers and thus achieves an extremely low standby power consumption of only 1 watt

 760 pull T

tousek Ges.m.b.H. - Zetschegasse 1, A-1230 Wien
Tel: +43 (1) 6673601-0 I Fax: +43 (1) 6678923   E-Mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

Are you interested in our products?
We gladly advise you!


Phone: 01 / 667 36 01
E-Mail: info@tousek.at

Catalogue selection

Pull T
LWA
LWS
GTZ
TT
SLIM
SWING X
TURN SERIE
SWING SERIE
TURN 310 UF
SPIN
PASS
LIFT X
FUNK
General brochure
Leaflet

Please enter your personal information

back