English

tousek TPS 35 PRO

The advantages at a glance:

  • Suitable for heavy duty use (100% duty cycle)
  • Large, illuminated LC -Display (2x16 characters)
  • Clear text menu programmable through four buttons
  • Distance measurement via absolute encoder. All learning cycles after unlocking and power failure are omitted.
  • Direct connection of four 8,2kΩ safety contact edges
  • Mechanical brake for safe gate stop
  • Input for gate back area monitoring
  • Emergency opening function. Upon failure of a safety device the operator can be operated in deadman mode
  • Revolution speed control via frequency Inverter
  • Very good energy efficiency thanks to gearing with high efficiency
  • Positioning of the end positions either automatically or manually
  • Easy-to-use emergency release. (Without tools)
  • In case of failure of a safety device it can still be moved in dead man mode.

schiebetorantrieb_tps35pro_antrieb


TPS60

control system integrated in a housing for maximum ease of use

Under the cover there is the latest generation of control systems. The main focus of all our controllers is the easy setting of all functional processes. All parameters as impulse /automatic mode, partial opening, soft stop and much more can be programmed in a very user friendly and time saving way by means of four buttons, a large backlit two-line LCD display and a plain text menu guidance.

You want more information about our controls? Click here to read more!


pull t kl 07

Self-learning end positions without limit for simplified operation

All TPS35 PRO models learn during the installation automatically the end positions. Additionally, you can finely adjust the set positions or adapt them to your needs. Mechanical limits that may be defective or freeze in winter, are completely eliminated.


pull t kl 10

Direct connection of two 8,2kΩ safety contact edges for more cost efficiency

As with all tousek sliding gate operators the highest security and reasonable costs are in no contradiction. Therefore, it is a standard for the TPS35 PRO to be able to monitor separately the main and secondary closing edge from each other. Surprises due to additional costs for additional processing electronics can be definitely ruled out.


feder

Standard soft start and soft stop for smooth gate movements

In both directions of movement the TPS35 PRO drive starts and stops with reduced speed. Besides the harmonious movement of the gate while also the entire mechanism of the gate and drive is protected


Optional gate status display

Even if the gate is not directly visible, with the optional alarm contacts the gate status can be checked in a reliable way at any time, wherever you are.


Constant power reserves thanks to frequency converter

A lot of power - even at reduced speed - is obvious for the TPS35 PRO. A fact which is enabled by a sophisticated combination of control and frequency converter. This ensures that every situation is managed with the highest level of reliability.


tps 60

tousek Ges.m.b.H. - Zetschegasse 1, A-1230 Wien
Tel: +43 (1) 6673601-0 I Fax: +43 (1) 6678923   E-Mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

Are you interested in our products?
We gladly advise you!


Phone: 01 / 667 36 01
E-Mail: info@tousek.at

Catalogue selection

Pull T
LWA
LWS
GTZ
TT
SLIM
SWING X
TURN SERIE
SWING SERIE
TURN 310 UF
SPIN
PASS
LIFT X
FUNK
General brochure
Leaflet

Please enter your personal information

back